Size Guide

Every measurement shown on a product page is taken from that individual piece. This page explains where and how each measurement is taken.

All of our pieces are one of a kind. Even within the same style, measurements differ from piece to piece, so please check the measurements on the product page of the item you are considering.

Haori & Robe

Haori

Haori size guide diagram showing how length, shoulder width, sleeve length and body width are measured.

Robe

Robe size guide diagram showing how length, shoulder width, sleeve length and body width are measured.

Haori and robes are measured at the same points.

  • Length: Measured flat, in a straight line from the top of the shoulder to the hem.
  • Shoulder Width: Measured across the back, from one sleeve seam to the other.
  • Sleeve Length: Measured from the sleeve seam to the edge of the sleeve opening.
  • Body Width (laid flat): Measured flat from underarm to underarm. This is not a full circumference.
  • Weight: The weight of the piece itself.

Haori and robe product pages also list a US / EU / UK size range. Kimono and haori are not designed to fit the body closely like Western clothing, so that range is only a guide.

Scarf

Scarf size guide diagram showing how length and width are measured.
  • Length: Measured flat from end to end.
  • Width: Measured at the widest point.
  • Weight: The weight of the piece itself.

Belt

Belt size guide diagram showing how the main section, tied section and width are measured.
  • Total Length: The main section and the tied section combined (not marked on the diagram). Use this measurement to check whether the belt will wrap around your waist and tie.
  • Main Section: From the end of the wide section to the point where the narrow tie begins.
  • Tied Section: From where the narrow tie begins to its end.
  • Width: Measured at the widest point of the main section.
  • Weight: The weight of the piece itself.

Comparing with a piece you already own

The most reliable way to choose a size is to lay a similar piece from your own wardrobe flat and measure the same points.

  • For haori and robes, comparing Length and Body Width gives you a good sense of how the piece will sit.
  • Body Width is measured flat across one side. To compare it with a chest circumference, double the body width.
  • For belts, use Total Length rather than the main section, since the belt needs to wrap around your waist and tie.

About vintage, one-of-a-kind sizing

  • Each piece is remade by hand from a vintage kimono. Even within the same style, measurements vary depending on the original garment.
  • Our pieces do not correspond to modern ready-to-wear sizing (S / M / L). Please refer to the measurements on each product page.
  • Kimono and haori are not cut to follow the body. The same piece drapes more loosely on smaller frames and appears more fitted on taller frames.
  • All measurements are listed in both cm and inches.

Questions about sizing

If you need more detail about the measurements of a particular piece, please contact us.